Posted on: 1 November 2021
As summer heat gets the best of your AC, you want to know what to do. There are various issues that you will have to deal with when your air conditioner goes out. Air conditioning repairs are something that most people will have to deal with sooner or later. The problem with many repairs is that you may not have the right information to know how to deal with them. The following AC troubleshooting areas are some things you need to look for when your system breaks.
Checking AC Electrical Wiring
First, you will want to troubleshoot the system for electrical problems. AC electrical problems can be as simple as a tripped breaker, or they can be more complicated problems.
First, check the electrical breaker to your HVAC system. Turn it back on if it is tripped; if the breaker continues to trip and cause the AC to turn off, there is probably a more serious problem. If there is an electrical main to your AC, check it too to make sure it is on and has not been accidentally turned off.
Finally, check the AC for obvious problems with its electrical wiring. Sometimes, if the system has not been used in a while, pests can damage the wiring, or there might be issues with damaged electrical wiring. There could also be issues with electrical components that have failed, like the AC capacitor or a circuit board.
Airflow, Vents, and the AC Blower
When troubleshooting issues with your AC not cooling effectively, some of the problems might have to do with airflow. There are several areas that you want to check to ensure your AC system has good airflow, including:
- Ductwork—The ducts might be one of the first areas where your system loses airflow. This happens when the ductwork is damaged and leaking air. These issues can usually be repaired easily before they cause more serious damage to your AC system.
- Vents—Your AC vents are another area where you might have problems with your system. You want to make sure the vents are open and check the air handler and dampers when inspecting ductwork. If you have filters in any vents, change or clean them. You can also remove vent filters in any areas where you have more of a problem with airflow.
- Blower—Finally, the blower fan is another area where there might be problems with your AC system. This might be due to dirty parts, the motor, or just worn-out equipment. If the blower is old, you might want to ask about having it replaced with more efficient equipment.
Sometimes, there might be a combination of problems that need to be addressed when you have issues with AC airflow repaired.
Freon Leaks and Problems with the AC Unit
The AC unit itself is another area where you want to check for problems when troubleshooting your system. There are various issues that can cause the AC unit to not work properly, and some of these issues can lead to freon leaks and damage to the compressor.
When you don't have your system serviced or cleaned, dirt can build up on the condensing coils. This is one of the primary causes of AC failures during the summer months. The dirt causes condensation to form on components, which then freeze over with ice when the system comes on. When this problem goes unnoticed, it can cause the compressor and other parts to overheat.
The cause of leaks in an AC unit usually starts at the compressor and condensing coils. This happens due to overheating or due to age and parts wearing out. The unit can also be damaged by other outside issues like debris from the environment, which can cause damage that leads to leaks.
If you need to get your AC fixed, it may be best to find someone who deals with them on a daily basis. Contact an AC repair service for help dealing with these issues when there is a problem with your system.Share